Share IT technologies and lab experiences with you
Posts tagged ‘dynamips’
Cisco L2TP over IPSec With Windows ClientI have completed this lab on Dynamips 7200 simulator, the topology is as follow:
Continue reading ‘dynamips lab:Cisco L2TP over IPSec With windows client’ »
I have completed this lab on 7200 simulator, the topology is as follow:
Continue discussion in part 1, the topology is as follow:
The Cisco SSL VPN supports on working on full-tunnel mode. In full-tunnel mode, an SSL tunnel is used to move data to and from the internal networks at the network (IP) layer. When the user logs into the SSLVPN gateway, the SSL VPN client (SVC) is automatically downloaded and installed at the end user’s PC, and the tunnel connection is established. Once the connection is established, the user has full VPN access to the corporate network.1. Preparing for Cisco Web VPN. (the same as part 1)
c7206(config)# int fa0/0c7206(config-if)# ip add 198.1.1.1 255.255.255.0
Continue reading ‘dynamips lab:Cisco ios ssl vpn on dynamips test note2’ »
This test note describes how to configure Cisco SSL VPN on Cisco IOS routers. The whole lab is build on Dynamips 7200 simulator.
SSL VPNs use a methodology to transport private data across the public Internet. Instead of relying upon the end user to have a configured client on an agency-managed computer, SSL VPNs use SSL /HTTPS which is the secure transport mechanism built-in to all standard Web browsers. Using an SSL VPN, the connection between the user and the internal resource occurs via an HTTPS connection at the application-layer.
I have completed all the Cisco SSL labs on Dynamips 7200 simulator, the topology is as follow:
The Dynagen configuration is as follow:
Continue reading ‘dynamips lab:Cisco IOS SSL VPN on dynamips test note’ »
The Dynagen configuration is as follow:
Continue reading ‘Cisco IOS site2site ipsec vpn on dynamips’ »
I have completed this lab on Dynamips 7200 simulator, the topology is as follow:
The Dynagen configuration is as follow:
Continue reading ‘dynamips lab:Cisco IOS l2tp voluntary tunnel mode on dynamips’ »
This test note describes how to configure Cisco Remote access IPSec VPN on Cisco IOS routers.
I have completed this lab on Dynamips 7200 simulator, the topology is as follow:
Continue reading ‘dynamips lab:Cisco IOS Easy VPN Server & Remote on Dynamips’ »
In the lab, both access link IP addresses are configured on R1 as IKE identities of R2. When R1 initiates IKE negotiation, the first peer IP address is used by IKE and becomes R2′s IKE identity for this peer. If this IKE SA times out during the negotiation, the second IP address becomes the IKE identity of the R2.
Continue reading ‘dynamips lab:Cisco high availability IPSec VPN on dynamips(loopback address)’ »
In fact, R1 and R2 is connected by their atm interface directly.
Continue reading ‘dynamips lab:Cisco ADSL PPPOE on dynamips’ »
