dynamips basic:Dynamips Router IOS and PORT ADAPTER supporte
Dynamips Router IOS and PORT ADAPTER supported
Dynamips Router IOS and PORT ADAPTER supported
The following Cisco 7200 Port Adapters (PA) are currently supported:
FastEthernet cards “C7200-IO-FE” and “PA-FE-TX” based on DEC21140 chip
FastEthernet cards “C7200-IO-2FE” and “PA-2FE-TX” based on Intel i8254x chips
GigabitEthernet cards “C7200-IO-GE-E” and “PA-GE” based on Intel i8254x chips
Ethernet cards “PA-4E” and “PA-8E” based on AMD Am79c97x chips
ATM card “PA-A1″ based on Texas Instruments Tneta1570 chip
Serial cards “PA-4T+” and “PA-8T”
POS (Packet over Sonet) card “PA-POS-OC3″ (experimental, only works with recent IOS images)
The following Cisco 3600 (3620,3640,3660) Network Modules (NM) are currently supported:
Ethernet cards: “NM-1E”, “NM-4E” and “NM-1FE-TX”, all based on AMD Am79c97x chips
Ethernet switching module: “NM-16ESW”
Serial card “NM-4T”
The following Cisco 2691/3725/3745 Network Modules (NM) are currently supported:
FastEthernet cards: “NM-1FE-TX”
Ethernet switching module: “NM-16ESW”
Serial card “NM-4T”
The following Cisco 2600 Network Modules (NM) are currently supported:
Ethernet cards: “NM-1E”, “NM-4E” and “NM-1FE-TX”
Ethernet switching module: “NM-16ESW”
Play with This lab:[localhost]
[[2610]]
image = /usr/local/cisco/dynagen-0.9.2/pc/image.bin
ram = 16
slot1 = NM-1E
idlepc = 0×801ea000
[[router PC1]]
model = 2610
[[3640]]
image = /usr/local/cisco/dynagen-0.9.2/pc/3640.bin
ram = 64
confreg = 0×2142
idlepc = 0×60401a54
[[router R1]]
model = 3640
slot1 = NM-4E
F0/0 = PC1 F0/0
[[router R2]]
model = 3640
slot1 = NM-4E
F1/1 = R1 F1/1
[[router PC2]]
model = 2610
F0/0 = R2 F0/0
[[router R3]]
model = 3640
slot1 = NM-4T -> Load 4 Serial interface on Slot 1 ie serial1/0
slot0 = NM-4E -> Load 4 ethernet interface on Slot 0 ie ethernet0/0
