Dear friend:

This website will not be updated any more. If you want any IT technical files or documents,you can access the content of the www.realexam.net website.

Cisco IOS site2site ipsec vpn on dynamips

The Dynagen configuration is as follow:

Cisco IOS site2site ipsec vpn.jpg


autostart = false
[localhost]
port = 7200
udp = 10000
workingdir = ..\Temp\

[[router R1]]
image = ..\IOS\ c7200-advsecurityk9-mz.124-9.T1.bin
model = 7200
console = 3001
npe = npe-400
ram = 128
confreg = 0×2142
exec_area = 64
mmap = false
slot0 = PA-C7200-IO-FE
slot1 = PA-4T
f0/0 = SW1 1
s1/1 = R3 s1/0
[[router R2]]
image = ..\IOS\c7200-advsecurityk9-mz.124-9.T1.bin
model = 7200
console = 3002
npe = npe-400
ram = 128
confreg = 0×2142
exec_area = 64
mmap = false
slot0 = PA-C7200-IO-FE
slot1 = PA-4T
f0/0 = SW1 2
s1/0 = R3 s1/1

[[router R3]]
image = ..\IOS\c3620-i-mz.122-37.bin
model = 3620
console = 3003
ram = 32
confreg = 0×2142
exec_area = 16
mmap = false
slot0 = NM-1FE-TX
slot1 = NM-4T
f0/0 = SW1 3
[[ethsw SW1]]
1 = dot1q 1
2 = dot1q 1
3 = dot1q 1
4 = access 1 NIO_gen_eth:\Device\NPF_{E4377B71-C2A8-40A9-9FB6-639EE19D2F75}

1. The configuration of R1


London(config)#interface Loopback0London(config-if)#ip address 10.1.1.1 255.255.255.0

London(config)#interface Serial1/1

London(config-if)#ip address 173.16.1.1 255.255.255.252

London(config-if)#no shutdown

London(config)#ip route 0.0.0.0 0.0.0.0 173.16.1.2

London(config)#crypto isakmp enable

London(config)#crypto isakmp policy 10

London(config-isakmp)#hash md5

London(config-isakmp)#authentication pre-share

London(config-isakmp)#encryption 3des

London(config-isakmp)#group 2

London(config)#crypto isakmp key cisco1234 address 173.16.1.5

London(config)#crypto ipsec transform-set ccsp esp-des esp-md5-hmac

London (cfg-crypto-trans)#mode tunnel

London(config)#crypto map cisco 10 ipsec-isakmp

London(config-crypto-map)#set peer 173.16.1.5

London(config-crypto-map)#set transform-set ccsp

London(config-crypto-map)#match address 101

London(config)#access-list 101 permit ip 10.1.1.0 0.0.0.255 10.2.2.0 0.0.0.255

London(config)#interface Serial1/1

London(config-if)#crypto map cisco

2. The configuration of R2


Denver(config)#interface Loopback0Denver(config-if)#ip address 10.2.2.1 255.255.255.0

Denver(config)#interface Serial1/0

Denver(config-if)#ip address 173.16.1.5 255.255.255.252

Denver(config-if)#no shutdown

Denver(config)#ip route 0.0.0.0 0.0.0.0 173.16.1.6

Denver(config)#crypto isakmp enable

Denver(config)#crypto isakmp policy 10

Denver(config-isakmp)#hash md5

Denver(config-isakmp)#authentication pre-share

Denver(config-isakmp)#encryption 3des

Denver(config-isakmp)#group 2

Denver(config)#crypto isakmp key cisco1234 address 173.16.1.1

Denver(config)#crypto ipsec transform-set ccsp esp-des esp-md5-hmac

Denver(cfg-crypto-trans)#mode tunnel

Denver(config)#crypto map cisco 10 ipsec-isakmp

Denver(config-crypto-map)#set peer 173.16.1.1

Denver(config-crypto-map)#set transform-set ccsp

Denver(config-crypto-map)#match address 101

Denver(config)#access-list 101 permit ip 10.2.2.0 0.0.0.255 10.1.1.0 0.0.0.255

Denver(config)#interface Serial1/0

Denver(config-if)#crypto map cisco

Flickr : , , , ,

Related Posts

2 Comments

  1. lvsale121 says:

    Lifeng Combine in Switzerland is the second biggest luxury goods combine around the world,Louis Vuitton Organizer Atoll it’s also the biggest famous watch combine in Switzerland. Francis·Kuto, the president of Lifeng Combine, Asia Pacific Ocean Company, Louis Vuitton Palermo GMsaid that there are three phases for luxury goods enter into a country or a region, the first phase is go on a fishing expedition,Omega Description give a small scale selling to improve the reputation; the second phase is to carry out reeducation to the consumers after got some reputation; the last phase is that the consumers have a good knowledge of the brand and know the goods and the brand they needed.

    [Reply]

  2. Ty Roberti says:

    I have tried to leave a response on this blog and each time I try it refreshes the screen or provides an error. Can the author could possibly look into the reason this is happening?

    [Reply]

Leave a Reply

wordpress visitor